SET EFFICIENCY while the motor is running. This feature can extend battery run time. A 5% increase in motor efficiency will yield 15 seconds of extra run time on a 300 sec. pack.

DIRECTLY CALCULATE GEAR RATIOS from a known motor to an unknown motor. This will allow you to use practice time for driving instead of trying to figure out gearing.

BRUSH & SPRING EFFECTS on RPM, AMPS, TORQUE, OUTPUT WATTS and EFFICIENCY are readily seen due to the extreme repeatability and sensitivity of the TURBOdyno.

WIDE RANGE TESTING will show you AMPS, RPM, TORQUE, WATTS and EFFICIENCY from a light load to a full 45 amp load. No other dyno will give you all these readings. Slave motor variations do not have any effect on TURBOdyno readings since the slave motor is just used as a load.

TESTING MOTOR PERFORMANCE will tell you which motors are your best motors without wasting valuable track time.

All MAJOR MOTOR MANUFACTURERS depend on the TURBOdyno to obtain world-winning performance from their motors. The TURBOdyno can do the same for you.

• ACTUAL DIRECTLY MEASURED TORQUE, rpm, amps, volts.
• HP Thermal PRINTER interface
• 12 VDC power required
• Manual or automatic operation
• 8 Setups stored in power down memory.
   

Suggested Retail Price: $1195.00 45 Amp
Optional Hewlett Packard Printer: $135.00