Competition grade charger for all NiCd or NiMh cells.     Multiple rate charge mode to customize your charge profile and get maximum performance from your packs. 5 setups that you can name to charge all kinds of NiMh & NiCd battery packs. Backlit display monitors Mah, volts and amps. Preprogrammed for use with common battery types. Part #CEI-4310 Dimensions 5" x 4" x 2.5" 12 to 15 volt DC supply required

Specifications: Peak detection linear charging from .15 to 7 amps and 4 to 7 cell packs. Backlit 32 character displays a built in volt meter ammeter and Mah. Shows cell data including time and milliwatt hour values. Over 20 selectable sounds. Selectable long lockout for 10 minutes of charge without peak detection. Selectable trickle after charge. Settable peak detect range .012 volts to .192 volts.

FEATURES INCLUDE: 5 charge setups that you can name with up to 8 characters each for charging all 4-8 cell NiCd and NiMh packs.
Multiple rate charge mode to customize your charge profile by setting up to 3 different amp rates at selected points during a charge. Trickle charge at the beginning to stabilize the voltage if you dead short your packs. Lower the rate for the last part of the charge for a cooler final temp. or raise the rate for the last part of the charge for higher voltage and initial punch.
Display shows mah output to battery pack as it's charging.

 

ORDER NOW

 

Operating instructions page 1 (.pdf)

Operating instructions page 2 (.pdf)